HobbyKing
KD36-60-06L 4000KV BRUSHLESS INRUNNER (11T)
| Dimensions | 36~60mm |
| Shaft size | 5mm |
| Weight | 260g |
| Idle Current | 5.9A |
| Resistance | .0044 |
| Max Amp | 100A |
Kv: 4000rpm/V (11T),
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-28M
| Dimentions | 28x28mm |
| Rating | 1050kv |
| Battery Config | 3 Lipo Cells |
| Shaft | 3.175mm |
| Weight | 43gr |
| Standard Current | 4-12A |
| Max Current | 15A |
| Suggested Prop | 9x4.7 |
5 Reviews
HobbyKing
TURNIGY G46 BRUSHLESS OUTRUNNER 670KV (.46 GLOW)
| RPM | 670kv |
| Max current | 40A |
| No load current | 10V/3.9A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.04 ohm |
| Diameter of shaft | 6mm |
| Dimensions | 76x50mm |
Battery:, 4~5 Cell /14.4~18.5V, Weight:, 303g (not including connectors),
Designed to be a direct swap out for your .40 ...5 Reviews
HobbyKing
HEXTRONIK DT700 BRUSHLESS OUTRUNNER 700KV
| Required Voltage | 11.1v |
| Suggested Battery Capacity | 1300mAh + |
| Suggested Prop | 10x4.7, 11x3.8 or 11x4.7 |
| Max current draw | 13A (with 11x4.7 prop) |
| Max thrust | 900g+ |
| No Load Current | 1.2A |
| Shaft | 4M (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 78g |
| Diameter | 41mm |
| Overall length | 77mm |
Kv: 700rpm/v,
Looks can be deceiving. This outrunner is around twice the ...5 Reviews
HobbyKing
FUTABA GY520 GYRO
| Width | 0.79in(20mm) |
| Length | 0.79in(20mm) |
| Height | 0.39in(10mm) |
| Weight | 0.243oz(6.9g) |
| Max. operating voltage | 3.8~6.0V(gyro only) |
| Current drain | 40mA(gyro only) |
| Operating temperature | 14~113F |
Features:, Offers premium performance at a surprisingly affordable price, Specifications:, Selectable servo frame rate:, 70Hz, 280Hz, and 560Hz, Center pulse width:, 1520us(70Hz & 280Hz frame rate), Flight mode:, User selectable F3C or 3D, Control system:, Advanced PID control, Sensor:, MEMS vibrating structure gyro, Angular velocity range:, +- 800 degrees per second, Recommended Servos:, 250~450 size electric:, Futaba S9257 EP Heli Digital (280Hz/1520us), .31~.91 size helicopter:, Futaba S9254 Digital Heli servo (280Hz/1520us),
Futaba GY520 The smallest, lightest and most advanced gyro in ...5 Reviews
HobbyKing
TURNIGY AQUASTAR 90A WATER COOLED ESC
| Brake | (None/Soft) |
| Throttle range | 640uS |
| Constant Current | 90A |
| Burst Current | 110A |
| Battery | 2-6S Lipoly |
| BEC | 3.5A/5v switching BEC, max 4A |
| Motor Type | Sensorless Brushless |
| Size | 90 x 36 x 20mm |
| Weight | 97g |
5 Reviews
HobbyKing
HOBBYKING VARIABLE 6S 50W 5A BALANCER/CHARGER W/ ACCESSORIES
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~6.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 193g |
| Note | Power supply not included. |
5 Reviews
HobbyKing
TURNIGY 28-22-CQ 1400KV BRUSHLESS OUTRUNNER
| Model | TR-28-22-CQ |
| Weight | 36g |
| Pull | 100~450g |
| Prop | 8x4 or 9x5 |
| Voltage | 6~9v |
| Length | 23mm |
Max Eff: 5A, Max Load: 8A, Kv: 1400,
5 Reviews
HobbyKing
HOBBYKING AP05 3000KV BRUSHLESS MICRO MOTOR (5.4G)
| Lipo Range | 1~2S (3.7~7.4V) |
| Suggested prop | 5030 |
| Weight | 5.4g (including mount and wire) |
| Shaft | 1.5mm |
| Shaft length | 14mm |
| Dimensions | 14 x 13mm |
| Current | 2.8A |
| Thrust | 110g |
Kv: 3000rpm/v, Max current: 3A, Burst current (5sec): 4A, Test data:, 5030 prop (Recommended), Voltage: 7V,
High quality micro motors. Precision wound with silver-copper wire and ...5 Reviews
HobbyKing
TOKI BIOWIRE 1G MICRO SERVO (WORLD FIRST)
| Dimensions | 38 x 9 x 3 (mm) |
| Weight | 0.8g (except a horn, a connector and cable) |
| Actuator | BMF65 x 120 mm (wight |
| Materials | body; ABS, built in parts and horn ; POM, PC boad ; Lead-free solder |
| Torque | approx. 15 gCm |
| Operational Angle | 30 degrees, right and left each side |
| Power Supply Voltage | 3-5V |
| Max. Current Consumption | 80mA, 0.3W (at right or left end point @ 4.8V ) |
| Input Line | 3 wire type; power supply (red +, black -), signal (white) |
| Control Signal | positive PWM signal of 1.5ms ± 0.5ms in every 20ms |
| Operating Temperature | 0-40 degrees (Celsius) |
5 Reviews
HobbyKing
TURNIGY G110 BRUSHLESS OUTRUNNER 295KV (1.10 GLOW)
| RPM | 295kv |
| Max current | 55A |
| No load current | 10V/1.2A |
| Current capacity | 65A/15sec |
| Internal resistance | 0.03 ohm |
| Diameter of shaft | 8mm |
| Dimensions | 79x63mm |
Battery:, 8~9S Cell /29.6~33.3V, Weight:, 485g (not including connectors),
Designed to be a direct swap out for your 1.10 ...5 Reviews
HobbyKing
SCM 2809 1800KV BRUSHLESS OUTRUNNER
| Battery | 2-3 Lipoly |
| Max Eff | 78% |
| Max Current | 6 to 9A (over 67% efficiency) |
| Int. Resistance | 270mohm |
| 10v no Load current | .65A |
| Dimensions | 27.5 x 22.5mm |
| Shaft | 3mm |
| Weight | 26.8g |
| Model Size | up to 380g |
| 3 lipoly | 7.6x3.5 or 8x4 |
| 2 lipoly | 9x5 |
Kv: 1800rpm/v,
Spec. Recommended Props;5 Reviews
HobbyKing
ADH50XL MICRO BRUSHLESS OUTRUNNER 3000KV
| Weight | 7.3g |
| Size | 13.9 x 22mm |
| Current | 10V/0.31A (No load) |
| Shaft | 1.5mm |
| Shaft length | 5mm |
| Prop | 4025 |
| Thrust | 90, 104, 110, 136g |
| Voltage | 7.4, 8.0, 8.4V |
| Current | 3.5, 3.7, 3.9A |
| Watts | 25.9, 29.6, 32.76W |
| Thrust | 122, 132, 140g |
| Efficiency (g/w) | 4.71, 4.46, 4.27 |
Kv:3000rpm/v, Max current:4A, Voltage:, 7.4, 8.0, 8.4, 10.0V, Current:, 2.70, 2.80, 3.0, 3.7A, Watts:, 19.98, 22.4, 25.2, 37W, Efficiency (g/w):, 4.50, 4.64, 4.37, 3.68,
ADH50XL Micro Brushless outrunner 3000kv Test data; GWS 4025 GWS ...3 Reviews
HobbyKing
HIGH-SPEED EDF DUCTED FAN UNIT 3BLADE 2.75INCH 70MM
| Material | Carbon Filled Plastic, Aluminum |
| Outside Diameter | 72mm |
| Inside Diameter | 69mm |
| Motor size | 28mm diameter max |
| Weight | 60 grams |
| Rotor | 3 bladed (68mm) dynamically balanced |
5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 1800KV / 875W
| Max current | 65A |
| Shaft | 4mm |
| Weight | 120g |
| ESC | 70A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, NTM Prop Drive 35-36A 1800, Kv:1800rpm/v, Max Power:, 700W @ 12v (3S) / 875W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock solid performance outrunners with ...5 Reviews